SENTRY-H 6120-BM

Sentry-h 6120-bm delivers 150 w of rf power without the added cost, weight and complexity typically found with a multi-role manpack radio design.

Description

Codan’s Sentry-H 6120-BM is designed for maximum reliability and efficiency and a wide range of DC input voltages for both military vehicle and base installations. The in-built power amplifier provides full-duty cycle performance across the complete HF band for all supported modes.

The 6120-BM provides 150 W of power so that you get the best and most reliable communications, without the need for an external power amplifier. Whether you’re configuring a base or mobile system, the compact and highly integrated unit along with the robust handset makes for quick deployment.

Key Features

Secure Voice And Data	Frequency Hopping	Data	3g Ale
Mil Spec	Smart Handset Control	Multilingual Support

Specifications

General

FREQUENCY RANGE
- Transmit: 1.6 to 30 MHz (optional: 1.5 to 30MHz)
- Receive: 250 kHz to 30 MHz
POWER OUTPUT: 150 W PEP ±1 dB (two-tone or voice), user-programmable in 1 W steps (low/medium/high)
CONTACTS: Up to 500 entries
HF NETWORKS: Up to 20 networks (simultaneous scanning)
PRESETS: Up to 100 user defined presets
INPUT VOLTAGE RANGE
- 13.8 V DC nominal, negative earth
- Functional range: 10.8 V to 35.2 V DC
FREQUENCY STABILITY: ±0.3 ppm from – 20°C to +60°C
SUPPLY CURRENT
- Transmit: output power 150 W, two-tone 11 A to 20 A CW or average speech 8 A for battery life calculations
- Receive: no signal < 0.6 A typical, 0.9 A maximum
GPS: RFU - external antenna, 2320 Handset - embedded receiver/antenna (GPS, GLONASS and Beidou)
PROGRAMMING: TPS-M- Radio Programming Software, USB memory device
LANGUAGE SUPPORT: English, Spanish, French, Arabic, Dari, Pashto, Portuguese and Polish
COMPLIANCE: CE, FCC Part 90, AS/NZS 4770, AS/NZS 4355, IC RSS-125

FREQUENCY RANGE
- Transmit: 1.6 to 30 MHz
- Receive: 250 kHz to 30 MHz
MODES: Single Sideband USB, LSB (J3E), AM (H3E), CW (J2A), AFSK (J2B), FSK (F1B), ISB (B7D or B2B), Software Defined
POWER OUTPUT: 150 W RF
DUTY CYCLE: 100% voice and data
RECEIVER SPECIFICATIONS
- Sensitivity: SSB: -125 dBm (0.12 uV)
- Selectivity: >65 dB at -1 kHz at -1 kHz +4 kHz SCF (USB)
TRANSMITTER SPECIFICATIONS
- Spurious And Harmonic Suppression: >65 dB below PEP
- Intermodulation Products: >31 dB below PEP

Waveform

AUTOMATIC LINK ESTABLISHMENT (ALE): MIL-STD-188-141D (Appendix A, Appendix C); FED-STD-1045; JITC Certified MIL-STD-188-141B; STANAG 4538 3G ALE
DATA: MIL-STD-188-110D (Appendix C); MIL-STD-188-110A/B (STANAG 4539) data capability with data rates up to 19.2kbps
SELCALL: CCIR 493-4 proprietary and open standard
DIGITAL VOICE
- TWELP 2400 bit/s, 1200 bit/s, 600 bit/s, 480 bit/s, 300 bit/s
- MELPe (STANAG 4591) 2400 bit/s, 1200 bit/s
DIGITAL VOICE (OPEN PROTOCOL)
- TWELP (600/700/1200/2400 bit/s)
- Note: Actual vocoder rate combinations are dependent on other Export/Non-export controlled capabilities that may also be enabled
ENCRYPTION
- AES-256 digital voice and data (256 keys, direct entry and programmable via Codan KMS/KFS & USB flash drive)
- CES-128 voice (97 x 16-digit keys, direct entry and programmable via Codan KMS/KFS & USB flash drive, 4-digit session PIN)
ECCM
- 6, 12, 25 hops per second (hps)
- Max Data Rate: 6hps (2400bps) 12hps (1200bps) 25hps (600bps)
- DV Vocoder Rates (TWELP only): 6hps and 12hps (1200bps, 600bps, 480bps, 300bps) 25hps (600bps, 480bps)

Electrical & Mechanical

SIZE
- RFU: 220 mm x 66.5 mm x 190 mm
- Handset: 67 mm x 210 mm x 72.5 mm
WEIGHT
- RFU: 2.82 kg
- Handset: 280 g (no cable)
INTERFACES: ATU Control, General Purpose Interface, Handset Interface, DC supply, USB (via Handset), Fan Control, H-250 Audio (powered), GPS antenna, Antenna, Ethernet via adaptor (TCP/IP, supports remote control)
TEMPERATURE RANGE: Operational at –30 to +60°C; 95% RH maximum, non-condensing
ENVIRONMENTAL STANDARDS
- MIL-STD-810G Shock, Drop, Vibration, Humidity, Blowing Dust, Salt Fog, Fungus, Altitude, Immersion
- IP67 1m / 60 minutes